Is Thicker Oil Better For High Mileage Cars?

Is 10w40 good for high mileage?

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle..

Can I go from 5w30 to 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40.

Should you use thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Which oil is thicker 10w40 or 20w50?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Will it help to run thicker oil in a car with over 100 000 miles?

For an older, high-mileage passenger car, it is recommended to switch to a thicker viscosity oil, such as 10W-30, when approaching and passing 100,000 miles, to lubricate the engine well for preservation.

Is 5w30 good for high mileage?

Both high mileage 5w30 and 10w30 engine oils have the same additives, the only difference is the viscosity at cold startups. Since both oils have the same operating temperature viscosity (30) and additives, they will perform exactly the same. However, 5w30 flows much better than 10w30 during cold starts.

Do high mileage oils work?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … In addition to having seal conditioners, high-mileage oils usually boast more detergents designed to clean out sludge inside the engine, plus other additives meant to reduce wear on moving parts.

What’s the difference between high mileage oil and synthetic?

In this respect, synthetic oil is far superior. Conventional oils will thicken in cold weather and thin out when very hot, while the viscosity of synthetic is much more uniform. … High Mileage Oil: Vehicles are lasting longer, and more than 2/3 of the cars on the road have more than 75,000 miles on them.

What happens if I put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is it OK to use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

Is it OK if I put 10w30 in a 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

What is the best oil to use in a high mileage car?

Mobil 1Our pick for the best motor oil is Mobil 1 High Mileage 10W-30 Motor Oil. It’s one of the best synthetic oils for high-mileage vehicles, reduces leaks, and minimizes sludge buildup. For a less expensive option, consider the Valvoline High Mileage Synthetic Blend Motor Oil.

Can you put 10w40 in a 5w30 engine?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

When should you use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Which oil is better 5w30 or 10w30?

5w30 is less viscous than 10w30. 5w30 is also the thinner engine oil of the two at lower temperatures. … 5w30 is used for light-duty engines while 10w30 is used for engines which carry heavier loads. 10w30 provides sealing action in the engine due to the fact that it is thicker than 5w30 engine oil.